Our prior aim is to deliver products to our customers which allow for high complexity and perfectly quality.
Due to our internal technical Research & Development department we are able to offer our customers an optimal advisory service as well as customer support. A personal consultancy to track down the actual output, the analysis of the problem and the technical preparation of a customer-specific solution guarantees a smooth settlement.
Long production life and related with this safeguarding against failure characterize the products of the Baude Group. To guarantee this as well for special constructions and new products a frequency controlled cable testing plant is in use. With a running speed of up to 90 m/min. and a weight stress of up to 350 kg the particular application area can be simulated and their reliability be proven.
The Baude Kabeltechnik was certificated with ISO 9001:1994 for the first time in September 1995.
Since January 2018 the whole Baude-Group is certified according to the most up to date quality norm DIN EN ISO 9001:2015. In this certification all company-processes important for quality are most thoroughly prooved. This guarantees that all Baude products correspond to a prescribed unchanging high standard from development to manufacturing and up to the final check .
Also here the orientation of our company towards realizing a maximum customer benefit is our objective. In the last evaluation of the quality norm ISO 9001:2015 the Baude-Group performed with a result high above average.
With the most modern technology, years of experience and expertise, we can offer our customers on request certificates for reeling cables and spiral cables, testing according to VDE and other services under one roof.
We started our co-operation with the VDE registration office in 1999 and since then we have available various survey reports for different products.
VDE-Report VDE-Report of reeling cables , Reg.Nr. 6510
VDE Report of spiral cables with PUR sheath up to 1 mm², Reg. Nr. 9945
VDE Report of spiral cables with PUR sheath from 1,5 mm², Reg. Nr. 9946
After a product is put on the market it must be assessed for possible risks and be approved. The relates to, for example, flammability, short circuit and electromagnetic compatibility.
The quality of an individual product is guaranteed by testing and certification, including according to international standards.
We are registered with various UL-style numbers, this applies to single core as well as multi-core cables, see among ul.com/certificates.
Scientifically researched and practically tested over many years!
There is no substitute for intellectual property! For that reason it must be appropriately protected – nationally and, above all, internationally.
Registered trademarks of the Baude Group
We let protect our ongoing developments by a registered trademark since 1987. The updated trademarks are the following:
Semoflex® und Roboschlepp®
The protection of human health and the environment, including the environmentally responsible recovery and disposal of old electrical materials and equipment is the aim of the RoHS Directive.
Substance of content of products (RoHS II)
RoHS is the abbreviation for the 'DIRECTIVE 2002/95/EG OF THE EUROPEAN PARLIAMENT AND COUNCIL' about the limitation of the application of certain dangerous materials in electric and electronic appliances - Directive of the Restriction of the Use of Certain Hazardous Substances in Electrical of and Electronic Equipment.
The EU directive 2002/95/EG (RoHS) becomes effective on 01. 07. 2006 and regulates the limitation as well as the prohibition of lead, mercury, Cadmium, Cr6+, PBB and PBDE in electronic appliances.
At present the production and the purchase of our products take place only in the EU and Switzerland, so the observance of the current German right, the Czech right and of the EU guidelines converted into German respectively Czech right is secured.
Our cables will not contain any forbidden content materials. We consider and work after the current RoHS directive in 2015/863/EU.
Your opinion matters to us!
We have been serving our customers for 40 years. Whether for the electrical wholesale trade, vehicle industry, engineering or construction industry – with engagement, know-how, the most up-to-date technology and motivated staff we carry out every customer order with the highest satisfaction!
In accordance with DIN ISO 9001:2015 we have prepared a questionnaire to give you the opportunity to put your wishes or improvements into practice in our business, This assessment form is sent to our customers at the start of the year.
In the meantime we look forward to your responses and constructive criticism. So do not hesitate to send it to us.
We thank you for your cooperation.